Loading... Please wait...

Categories

Blog

Ribtec 535 re-tube

Ribtec 535 re-tube in Red Hypalon with black wear patches and handles.

Read More »

Scorpion 8.5 meter Rib tube fit.

Scorpion 8.5 meter Rib tube fit.

Read More »

Replacing rub strake fendering on Stingher Rib

Rib Shop staff replacing the rub strake fendering on a Stingher Rib in Guernsey.

Read More »

New Rib tubes

Military grey Rib tubes with black D-fender, wear patches and lifelines.

Read More »

Ribtec 455 tubes

Rib Shop fitted these Italia Green Hypalon tubes at the Sailing clubs request so it could be easily spotted.The Rib tubes were finished with Alpin Blue wear patches and cut Hyplaon name patches.

Read More »

Ribtec tubes

Rib Shop fitted these new Hypalon tubes to this Ribtec 7m. We collected the Rib from Condor in Portsmouth after it was shipped over from Guernsey for the job to be carried out. After the works were complete Rib Shop dropped the boat back to Portsmouth for its return trip.

Read More »

Protector Rib

Protector Rib prepped ready for the boating season.Rib Shop prepped  this Protector Rib ready for the ready for the 2015 boating season.The Twin Yamaha F150s had the annual service batteries and battery switches replaced and wiring checked.The tubes were deep cleaned using Rib Revive and then protected with Rib Conditioner.The hull was polished and antifould.One of the common [...]

Read More »

Cobra Rib Improvements

Rib Shop have been contracted to carry out improvements to an 8.5 meter Cobra Rib.The owner was not happy with the standard Cobra Rib drainage arraignment. Many Cobra Ribs drain straight into a sump that is directly connected with the under deck area with only a bilge pump to rely on to get rid of any water this combined [...]

Read More »

Ribtec Rib re-fit

Rib Shop have been chosen to carry out the extensive Rib re-fit of a Ribtec 7.5 meter Rib.The Rib re-fit will include complete strip of engine, electronics, consoles, seating, tubes, deck, bulkheads and stringers.Step 1:  Remove tubes, consoles and seating.Step 2: Remove old deckStep 3: Clean up remaining hull ready to take new bulkheads and stringers.Step 4: [...]

Read More »


 

What's News

newsletter

Follow us on

Copyright 2017 Rib Shop Ltd. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter