Cougar spare parts

C7 valve Service / Repair Kit The C7 inflation valve service kit includes the diaphragm, spindle, spring and seal When removing the C7 valve you may require the valve spanner   How to replace the valve diaphragm on a C7 inflation valve:...

Valve adaptor for C7 and D7 Rib inflation valves. Pump hose adaptor with bayonet fitting one end and Leafield Marine C7/D7 fitting the other end.  Due to the variety of bayonet hose types available the adaptor comes with a seal and 2 spacer...

C7/D7 Rib inflation valve cap Replacement valve cap for Leafield C7 and D7 valves. Available in Black or Grey. 

Valve replacement kit for Hypalon inflatable boats Complete kit to replace valves of Ribs and inflatable boats If you cannot find the valve that you currently have fitted, there is every chance that it is no longer available. This is why we have put...

Valve adaptor for C7 and D7 Rib inflation valves. Leafield C7/D7 valve to pump adaptor.  This Leafield valve adaptor will fit pump hoses of 16mm or 20mm and allows the pump hose to be securely fitted to the Leafield C7 or D7 valves...

Leafield A6 Pressure Relief Valve - 3.25psi The Leafield A6 Over Pressure Valve is the standard pressure relief valve fitted to many Rib tubes. It is a compact, rugged and reliable OPV and is a firm favourite with many manufacturers of liferafts, RIBs...

D7 valve Service / Repair Kit The D7 inflation valve service kit includes the diaphragm, spindle, spring and seal When removing the D7 valve you may require the valve spanner   How to replace the valve diaphragm on a D7 inflation valve:...

A7 / B7 Inflation Valve Service Kit Easy to fit repair kit for A7 and B7 inflation valves. The A7 and B7 valves were fitted to many Ribs and inflatables including Avon, Ribtec, Ribcraft, Humber, Cobra, Revenger.  These started to be replaced with...

C7 Rib Inflation Valve Leafield C7 inflation valves are the standard valve fitted to most UK built Ribs built from 1999 onwards. Before you replace the C7 valve, test the centre of the valve using soapy water and if the air is leaking from this area...

Valve spanner for A6 or B7 inflation valves   This spanner is required when replacing, servicing or cleaning A6 or B7 inflation valves.

Valve spanner for use with D7, C7 and A6 inflation valves.   When you need to repair, clean or replace the D7, C7 or A6 inflation valve, this spanner allows for easy removal and re-fitting of the valve.

Hypalon glue for Ribs and inflatable boats Hypalon two part Rib glue / adhesive for Hypalon Ribs, inflatable boats and liferafts Rib Shop two part Hypalon glue is produced to the highest quality and will give a permanent professional bond on all types...

Repair kit for Hypalon Ribs and inflatable boats A professional & permanent Hypalon Rib & Dinghy Repair Kit Our Rib repair kits are supplied in a water resistant container with professional two part glue & curing agent. Two pack glue is far...

Hypalon thinners - solvent cleaner Toulene Free Hypalon thinners for use in preparing areas ready for gluing and removing excess glue. Our toulene free Hypalon thinner solvent should be used to prepare Hypalon prior to applying glue or making repairs...

Valve doubler patch Using a valve doubler makes it easy to fit new valves into Hypalon Rib and inflatable boat tubes. These patches are 160mm in diameter and can be used with the A7, B7, C7 or D7 valves. You will need Hypalon...