Mould removal kit

For use on both PVC and Hypalon fabrics

This kit contains:

1 x 1lt New Magic cleaner

1 x 750ml Shmuffex Active mould remover

1 x 750ml Gumemp fabric protector

New Magic: DESCRIPTION: Specially formulated product to restore and maintain any kind of inflatable boats. It brings back the original colour of the tubulars made of neoprene or PVC that have previously been damaged by UV rays and salt. It removes any kind of dirt, grime and stains. Ideal to prepare the surfaces of inflatable boats before any possible repairs or any permanent gluing. It removes old waxes and silicones.

DIRECTIONS FOR USE: Spray the product onto surfaces of 50 cm², wipe with a soft brush or a sponge, then rinse and dry. For a better result, after using New Magic, we recommend to use one of the following protective waxes: New Gum Cream or Gumemp100. For new inflatable boats and/or not very dirty, or in case of frequent washing  we recommend to dilute the product up to 1:1 with water.

Shmuffex: DESCRIPTION: It removes mould stains from fibreglass, rubber and sky (boats, inflatable boats and cushions). Sodium hypochlorite based product, Shmuffex is not suitable for fabric because it may damage it.

DIRECTIONS FOR USE: First of all, remove any excess soiling not due to mould; then spray product directly onto the surface to be cleaned; let stand until mould stains disappear and then rinse with water. The length of time for treatment will vary, depending on the type and severity of mildew. Then, if necessary, leave in for an hour, or apply the product several time in order to get the desired result.

Gumemp : DESCRIPTION: Polymeric protective product designed to protect and polish any inflatable boats made of neoprene or PVC, fibreglass boats, surf boards, canoes and any kind of smooth surface. It creates a plastic film upon every treated surface that protects against salt, environment agents and U.V. rays.

DIRECTIONS FOR USE: Spray the product evenly and wipe with a cloth moistened with the product; leave to dry. Wipe again with a clean dry cloth. NB. Drying time will vary according to temperature. Always allow the surface to completely dry before applying Gumemp100.